增材制造 (3D/4D打印)
徐慶坤, 胡建東, 張文叢. Ti6-Al4-V表面激光熔覆TiBCN粉末的研究. 現代技術陶瓷，2018, 39: 106-114.
Xu QK, Hu JD, Zhang WC. Application of TiBCN powder as additive in laser coating of Ti6-Al4-V. Advcanced Ceramics, 2018, 39: 106-114.
黃小婷, 胡傳奇, 賈志輝, 等. 莰烯基陶瓷料漿快速制造技術研究. 現代技術陶瓷，2017, 38: 447-457.
Huang XT, Hu CQ, Jia ZH, et al. Rapid manufacturing technology of camphene-based ceramic slurry. Advcanced Ceramics, 2017, 38: 447-457.
杜曉宇, 俞斌, 丁惠鋒, 等. 三維打印珍珠粉-硫酸鈣/聚己內酯復合支架及性能研究. 現代技術陶瓷，2017, 38: 299-310.
Du XY, Yu B, Ding HF, et al. 3D printing of pearl-CaSO4/PCL composite scaffolds and their properties. Advcanced Ceramics, 2017, 38: 299-310.
劉凱, 孫華君, 王江, 等. 3D打印成型陶瓷零件坯體及其致密化技術. 現代技術陶瓷，2017, 38: 286-298.
Liu K, Sun HJ, Wang J, et al. Techniques of 3D printing combined with densification processes for the fabrication of ceramic parts. Advcanced Ceramics, 2017, 38: 286-298.
范曉孟, 殷小瑋, 馬昱昭. 三維打印制備MAX基復相陶瓷研究進展. 現代技術陶瓷，2017, 38: 278-285.
Fan XM, Yin XW, Ma YZ. Research progress on MAX-phase-based ceramics fabricated by three-dimensional printing. Advcanced Ceramics, 2017, 38: 278-285.
連芩, 武向權, 田小永, 等. 陶瓷增材制造. 現代技術陶瓷，2017, 38: 267-277.
Lian Q, Wu XQ, Tian XY, et al. Additive Manufacturing of Ceramics. Advcanced Ceramics, 2017, 38: 267-277.
黃淼俊, 伍海東, 黃容基, 等. 陶瓷增材制造 (3D打印) 技術研究進展. 現代技術陶瓷，2017, 38: 248-266.
Huang MJ, Wu HD, Huang RJ, et al. A review on ceramic additive manufacturing (3D printing). Advcanced Ceramics, 2017, 38: 248-266.
梁棟, 何汝杰, 方岱寧. 陶瓷材料與結構增材制造技術研究現狀. 現代技術陶瓷，2017, 38: 231-247.
Liang D, He RJ, Fang DN. Development of additive manufacturing of ceramics. Advcanced Ceramics, 2017, 38: 231-247.
